Agilent Technologies Agilent 3499A User Manual

49
Chapter 2 Front-Panel Operation
To Configure the Remote Interface
4
2
To set the RS-232 interface:
1. Press the Menu key. The CONFIG annunciator lights up and the
first level menu is shown.
2. Turn the knob to select “INTERFACE” in the menu.
3. Press Enter to show the second level menu The active interface is
shown. If necessary, turn the knob until “RS-232” is displayed.
4. Press Enter to select the interface and show the first parameter.
5. Turn the knob until the desired baud rate is displayed.
6. Press Enter to select the baud rate and show the second parameter.
CARD PAIR
INTERFACE
RS-232
9600 BAUD
19200 BAUD
NONE; 8 BITS

Agilent Technologies Agilent 3499A Specifications

General

Brand	Agilent Technologies
Model	Agilent 3499A
Category	Control Systems
Language	English