2 Power Meter Operation
78 E4418B Power Meter User’s Guide
Pressing or increases or
decreases the multiplier shown in front of or . Pressing or after
the correct multiplier has been selected confirms the entry.
To select both an analog and digital display, press until the two
windows are displayed. Select the format of one window to analog and the
other to digital as previously described.
To indicate if the measurement reading is outwith the minimum or
maximum values set for the analog meter, a warning message is displayed.
The analog meter also displays a digital reading. This digital reading
allows you to easily set the appropriate minimum and maximum values for
the analog display.
The analog display does not indicate as much measurement data as the digital display.
That is, it does not indicate when duty cycle, range hold, offset, or relative mode are
enabled. In addition, it does not indicate if the measurement is within the test limits if any
are set.
To Next Page
Loading...
