Agilent Technologies G1314B VWD Reference Manual

118 Agilent 1200 Series Autosampler Reference Manual
4 Repairing the Autosampler
3 Remove the stator head and stator face. 4 Place the stator face in place on the stator head. Ensure
the pins on the stator engage in the holes in the stator
head.
5 Install stator head and stator face. Tighten the bolts
alternately two turns at a time until the stator head is
secure.
6 Reconnect the pump capillaries to the valve ports (see
“Hydraulic Connections” on page 35).

Agilent Technologies G1314B VWD Specifications

General

Brand	Agilent Technologies
Model	G1314B VWD
Category	Laboratory Equipment
Language	English