Agilent Technologies G1314B VWD Reference Manual

64 Agilent 1200 Series Autosampler Reference Manual
3 Troubleshooting and Test Functions
Leak Sensor Short
The leak sensor in the autosampler has failed (short circuit).
The current through the leak sensor is dependent on temperature. A leak is
detected when solvent cools the leak sensor, causing the leak-sensor current to
change within defined limits. If the current increases above the upper limit,
the error message is generated.
Probable Causes
• Defective leak sensor.
Suggested Actions
✔ Exchange the leak sensor.

Agilent Technologies G1314B VWD Specifications

General

Brand	Agilent Technologies
Model	G1314B VWD
Category	Laboratory Equipment
Language	English