Agilent Technologies G1314B VWD Reference Manual

68 Agilent 1200 Series Autosampler Reference Manual
3 Troubleshooting and Test Functions
Open Cover
The top foam has been removed.
The sensor on the ASM board detects when the top foam is in place. If the
foam is removed, the fan is switched off, and the error message is generated.
Probable Causes
• The top foam was removed during operation.
• Foam not activating the sensor.
• Sensor defective.
Suggested Actions
✔ Replace the top foam.
✔ Exchange the ASM board.

Agilent Technologies G1314B VWD Specifications

General

Brand	Agilent Technologies
Model	G1314B VWD
Category	Laboratory Equipment
Language	English