Agilent Technologies G1314B VWD Reference Manual

122 Agilent 1200 Series Autosampler Reference Manual
4 Repairing the Autosampler
7 Place the stator face in place on the stator head. 8 Install stator head and stator face. Tighten the bolts
alternately two turns at a time until the stator head is
secure.
9 Reconnect the pump capillaries to the valve ports (see
“Hydraulic Connections”on page 35).
10 Slide the waste tube into the waste holder in the leak tray.

Agilent Technologies G1314B VWD Specifications

General

Brand	Agilent Technologies
Model	G1314B VWD
Category	Laboratory Equipment
Language	English