Agilent Technologies G1314B VWD Reference Manual

Agilent 1200 Series Autosampler Reference Manual 145
Repairing the Autosampler 4
3 While holding the sampling unit and tray base, slide the
leak sensor into the holder in the leak plane.
4 Place the sampling unit and tray base into the
autosampler.
5 Slide the sampling unit and tray base forwards. Ensure the
sampling unit connector is seated correctly.
6 Install the pump and column thermostat capillaries (ports
1 and 6) in the injection valve.
Connector

Agilent Technologies G1314B VWD Specifications

General

Brand	Agilent Technologies
Model	G1314B VWD
Category	Laboratory Equipment
Language	English