Agilent 1100 Series Fraction Collectors User’s Guide 31
Configuration and Operation of the Fraction Collector 1
Setting up a Fraction Collector Method
Auxiliary
In the Auxiliary section the Maximum fill volume per location can be specified. If
as configured is selected, the pre-configured volume (see Instrument >
Pre-configured Wellplate Types) is used. This ensures that the location (well, vial
or tube) cannot be overfilled during fraction collection. This volume can be
further reduced by defining a customized volume.
Additional check boxes in this section provide the opportunity to Store the
temperature signal and the UIB signal.
To Next Page
Loading...
