1260 Infinity II Flexible Pump User Manual 59
3Using the Module
Solvent Information
Materials in Flow Path (G7314C)
Following materials are used in the flow path of this module:
Part Materials
Degasser chamber TFE/PDD copolymer, PFA (internal tubings); PEEK (inlets); FEP (tubings);
ETFE (fittings)
Ultra clean tubings
1
1
Ultra clean tubings are available for the use with high-end MS detectors. They are also compatible to
THF.
PFA (tubings), PEEK (fittings)
Microfluidic
structures
2
2
Inlet Weaver, Jet Weaver, Heat Exchanger
SST and Bio-Compatible Coating
4CGV FFKM and PEEK
Passive inlet valve Gold, Ruby, MP35N, tantalum
Outlet valve Gold, Ruby, MP35N, tantalum
Pump head MP35N
Pistons ZrO
2
-based ceramic
Piston/wash seals Gold and UHMW-PE
Pressure sensor MP35N
Multipurpose Valve DLC coated MP35N and PEEK-based rotor seal
To Next Page
Loading...
Need help?
General
