Agilent Technologies G7117C User Manual

Agilent InfinityLab LC Series Diode Array Detectors User Manual 218
13 LAN Configuration
Manual Configuration
With the Instant Pilot (G4208A)
To configure the TCP/IP parameters before connecting the module to the
network, the Instant Pilot (G4208A) can be used.
1 From the Welcome screen press the More button.
2 Select Configure.
3 Press the module button of the module that hosts the LAN interface (usually
the detector).
4 Scroll down to the LAN settings.
Figure 70 Instant Pilot - LAN Configuration (Edit mode)
5 Press the Edit button (only visible if not in Edit mode), perform the required
changes and press the Done button.
6 Leave the screen by clicking Exit.

Agilent Technologies G7117C Specifications

General

Brand	Agilent Technologies
Model	G7117C
Category	Laboratory Equipment
Language	English