Agilent InfinityLab LC Series Diode Array Detectors User Manual 45
3 Using the Module
The Detector User Interface
The Detector User Interface
Within the detector GUI, there are active areas. If you move
the mouse cursor across the icons the cursor will change.
1 Lamp: turn on and off of UV-lamp
2 EMF status
3 Detector status
4 Lamp status (on/off) and information (RFID tag)
5 Flow Cell information (RFID tag)
RFID tag information is displayed when moving with the
mouse cursor on to the tag attached to the flow cell or lamp.
The information provides flow cell and lamp related informa-
tion like
• Part number
• Production date
• Serial number
and other details.
EMF Status shows Run / Ready / Error state and “Not Ready
text” or “Error text”
• Offline (gray)
• Ok. No Maintenance required (green)
• EMF warning. Maintenance might be required (yellow)
• EMF warning. Maintenance required (red)
Important: The EMF settings can be accessed via Agilent Lab
Advisor. The limit(s) can be changed. Based on the limit, the
User Interface displays the above status.
To Next Page
Loading...
Need help?
General
