EasyManuals Logo

Agilent Technologies M3860A User Manual

Agilent Technologies M3860A
96 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #33 background imageLoading...
Page #33 background image
Testing
M3860A and M3861A H
EARTSTREAM FR2 Defibrillator 4-9
4
Screen contrast can be adjusted during the battery insertion selftest by using
the Option buttons.
If battery power is low, replace the battery. If a previous selftest has failed, the
screen displays a message that the H
EARTSTREAM FR2 must pass a selftest
before being used.
It is recommended that you always have a spare battery available. However, if
a screen display prompts you to replace the battery or the Status Indicator
shows a flashing red
X, but you do not have a spare battery, you can continue
to use the H
EARTSTREAM FR2 until the battery is completely depleted. This
may be necessary in an emergency.
During the first part of the selftest, the screen displays a bar that fills in as the
test continues. When that part of the test is finished, the H
EARTSTREAM FR2
beeps. The results of the selftest are automatically recorded on the data card
while the tests are running, if a data card was inserted in the FR2 prior to
installing the battery.
If the first part of the selftest fails:
The screen displays a message that the selftest has failed. After a short
time, an error code is displayed. Write down the error code and contact
Agilent Technologies for technical service.
The Status Indicator shows a flashing or solid red X.
Replace the battery with a new battery and repeat the test. If the second
selftest fails, do not use the H
EARTSTREAM FR2.
If the first part of the selftest passes:
The screen displays a message that the selftest passed then begins the
interactive part of the test.
The Status Indicator shows a flashing black hourglass.
The interactive part of the selftest requires you to respond to prompts in order
to make sure the display, buttons, lights, and speaker on the H
EARTSTREAM
FR2 are working properly.
Screen prompts guide you through a series of steps in the interactive part of
the selftest. Some ask you to observe that a feature of the H
EARTSTREAM FR2
works properly. Others ask you to take certain actions — for example, to press
RUN SELFTEST
REVIEW INCIDENT
NO DATA CARD
LOW BATTERY
NEXT
SELFTEST MUST
PASS BEFORE USE
SELFTEST FAILED
REV: 01EM30 0201
NOT READY FOR USE
SN 000000001
SELFTEST PASSED
REV: 01E30 0201
NO DATA CARD
SN 000000001
IN EMERGENCY
PRESS OFF TO QUIT

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Agilent Technologies M3860A and is the answer not in the manual?

Agilent Technologies M3860A Specifications

General IconGeneral
BrandAgilent Technologies
ModelM3860A
CategoryMedical Equipment
LanguageEnglish

Related product manuals