5 Using 8480 Series Power Sensors
130 N1913/1914A EPM Series Power Meters User’s Guide
8487A This sensor requires an APC 2.4 (f) to 50 Ω (m) N-Type adapter
(08487-60001) to connect to the POWER REF. Remove this adapter
before making measurements.
8487D Prior to calibration, an Agilent 11708A 30 dB reference attenuator
and an APC 2.4 (f) to 50 Ω (m) N-Type adapter (08487-60001)
should be connected between the power sensor and the POWER
REF. Remove this adapter before making measurements.
Sensor Connection Requirements
To Next Page
Loading...
