Maintenance 9
Agilent N1913A/1914A EPM Series Power Meters User’s Guide 211
Erasing Memory Data
If you need to erase the EPM Series Power Meter’s memory, for example,
before you return it to Agilent Technologies for repair or calibration, of all
data stored in it.
The memory data erased includes the save/recall states and power on last
states.
The following procedure explains how to do this.
1. Press the key.
2. Press .
3. Press .
4. Press .
5. If you are sure, press the
Confirm key.
6. A pop- up appears, as shown in Figure 9- 4 informing you of the status
of the procedure.
Figure 9-4 Secure erase status pop-up
To Next Page
Loading...
