2 General Power Meter Functions
42 N1913/1914A EPM Series Power Meters User’s Guide
The State column indicates if any frequency dependent offset tables are
currently selected. The Offset Tables screen is shown in Figure 2- 8.
Procedure
Select an offset table as follows:
1 Press, either:
a. , , .
b. , and use the and keys to highlight the
FDO Table setting field and press to display the table.
Figure 2-8 Frequency dependent offset tables display
You can also view which FDO table is being used by pressing the ,
and use the and keys to highlight the FDO Table setting field and press to
display the table.
To Next Page
Loading...
