10 Specifications and Characteristics
232 Agilent N1913/1914A EPM Series Power Meters User’s Guide
Measurement Characteristics
Measurement Speed
Over the GPIB, three measurement speed modes are available as shown,
along with the typical maximum measurement speed for each mode:
• Normal: 20 readings/second
• x2: 40 readings/second
• Fast
1
: 400 readings/second, for Agilent E- Series power sensors only
Maximum measurement speed is obtained using binary output in free run
trigger mode.
1 For SCPI programming, the measurement speed, FAST is retained at 200 readings/second.
To Next Page
Loading...
Need help?
General
