Agilent Technologies N1913a User Manual

xx
Figure 2-25 Minimum limit pop-up 64
Figure 2-26 Limit failures 65
Figure 2-27 Measurement Setup showing single configuration 66
Figure 2-28 Function pop-up 67
Figure 2-29 Measurement Setup showing combined configuration 68
Figure 2-30 Measurement example display 68
Figure 2-31 Max hold/min hold measurement is performed on the ‘HOLD’ block 69
Figure 2-32 Hold pop-up 70
Figure 2-33 Min Hold and Max Hold measurement mode indicated in the display 70
Figure 2-34 Measurement mode in full word 71
Figure 2-35 Recorder Minimum pop-up 73
Figure 2-36 Recorder Maximum pop-up 74
Figure 2-37 Save/Recall screen 75
Figure 2-38 Save confirm pop-up 75
Figure 2-39 File name pop-up 76
Figure 2-40 Recall pop-up 76
Figure 2-41 Zeroing pop-up 77
Figure 2-42 Please zero and calibrate window 78
Figure 2-43 Calibration wait pop-up 79
Figure 2-45 Secure Blank feature 85
Figure 2-46 Enter 6-digit Password pop-up 86
Figure 2-47 6-digit password entered 86
Figure 2-48 Warning message 87
Figure 2-49 Reconfirm password 87
Figure 2-50 Warning message 88
Figure 2-51 Password reconfirmation pop-up 88
Figure 2-52 Enter password to restore display 89
Figure 2-53 Backlight intensity control 90
Figure 2-54 Increase or decrease the backlight brightness 90
Figure 2-55 Activate memory erase using combo keys 91
Figure 2-56 Secure Erase 92
Figure 2-57 Confirmation to begin secure erase 92
Figure 2-58 Warning pop-up 93
Figure 2-59 VGA toggle ON/OFF 94
Figure 2-60 Enable/disable warm start feature 95

Agilent Technologies N1913a Specifications

General

Brand	Agilent Technologies
Model	N1913a
Category	Measuring Instruments
Language	English