Maintenance 9
Agilent N1913A/1914A EPM Series Power Meters User’s Guide 213
• Surround the power meter with at least 3 to 4 inches of packing
material, or enough to prevent the power meter from moving in the
carton. If packing foam is not available, the best alternative is SD- 240
Air Cap TM from Sealed Air Corporation (Commerce, CA 90001). Air
Cap looks like a plastic sheet covered with 1- 1/4 inch air filled bubbles.
Use the pink Air Cap to reduce static electricity. Wrap the power meter
several times in the material to both protect the power meter and
prevent it from moving in the carton.
• Seal the shipping container securely with strong nylon adhesive tape.
• Mark the shipping container “FRAGILE, HANDLE WITH CARE” to
ensure careful handling.
• Retain copies of all shipping papers.
To Next Page
Loading...
Need help?
General
