Agilent Technologies SureCycler 8800 - Page 38

4PCR Programs
To manually create programs
38 Agilent SureCycler 8800 Setup and User’s Guide
7 T
o enter information about the PCR program (optional):
a Press the Program Information button (shown below). A new screen
will open.
b Press the keyboard icon (shown below) to access the touchscreen’s
virtual keyboard.
c Enter a description of the program. When finished, press OK to
return to the programming screen.
8 To save the file before running the PCR program.
a press the Sa
ve
button (shown below). The Save Program screen will
open.
b Press the keyboard icon (shown below, left) to access the
touchscreen’s virtual keyboard and use the keyboard to type a name
into the Program Name field. Once the name has been entered, close
the virtual keyboard by pressing the icon again (shown below, right).
c Select the folder to which the program will be saved using the
directory at the bottom of the screen. You can press Create Folder if
a new folder needs to be created.
d Once the correct folder name is in the Save
to User Folder field,
press Save to save the program.
e A dialog window will open indicating t
hat the file was successfully
saved. Press OK in this window to return to the programming
screen.