Agilent Technologies U1253B User's And Service Guide

132 U1253B User’s and Service Guide
5Maintenance
Fuse checking procedure
It is recommended that you check the fuses of the
multimeter before using it. Follow the instructions below to
test the fuses inside the multimeter. Refer to Figure 5- 8 for
the respective positions of Fuse 1 and Fuse 2.
1 Set the rotary switch to .
2 Connect the red test lead to the input terminal .
Figure 5-7 Fuse checking procedures

Agilent Technologies U1253B Specifications

General

Brand	Agilent Technologies
Model	U1253B
Category	Multimeter
Language	English