172 U1253B User’s and Service Guide
6 Performance Tests and Calibration
Calibration error codes
Table 6- 5 below lists the various error codes for the
calibration process.
Table 6- 5 Calibration error codes and their respective meanings
Error code Description
ER200 Calibration error: Calibration mode is secured.
ER002 Calibration error: Security code invalid.
ER003 Calibration error: Serial number invalid.
ER004 Calibration error: Calibration aborted.
ER005 Calibration error: Value out of range.
ER006 Calibration error: Signal measurement out of range.
ER007 Calibration error: Frequency out of range.
ER008 EEPROM write failure.
To Next Page
Loading...
Need help?
General
