60 U1253B User’s and Service Guide
3 Functions and Features
Data Hold (Trigger Hold)
The Data Hold function allows you to freeze the displayed
value.
1 Press to freeze the displayed value and to enter
manual trigger mode. is displayed.
2 Press again to trigger the freezing of the next
measured value. The character “T” in the
annunciator flashes before the new value is updated on
the display.
3 While in the Data Hold mode, you may press to
switch between DC, AC, and AC+DC measurements.
4 Press and hold or for more than 1 second to
quit this mode.
To Next Page
Loading...
