Use and Maintenance Manual - X_RT Series Page 30
Secondary safety system “S.A.F.E.” button (optional)
Drive, lifting and (optional) platform extension/retraction operations are controlled by the proportional joystick controls A-B-C-D-E; it is
therefore possible to adjust movement speed by means of the relative controls.
To avoid sudden shakes during movements, it is advisable
to operate the proportional joystick controls gradually.
For safety reasons, to operate the machine, it is necessary to press “dead-man” button ZD at platform before operating the controls.
Once the dead-man button is pressed, you have 5 seconds to activate the controls. If no operation is
performed after 5 seconds, the control panel is disabled.
The condition of disabled control panel is reported by the green flashing led (see paragraph “Warning
lights”). To operate the machine again press the dead
To Next Page
Loading...