Use and Maintenance Manual - X_RT Series Page 9
1.5 Control panels
The machine is equipped with two control panels:
On the platform for normal use of the machine.
On the chassis is fitted with the emergency controls to lower or stop the platform and the emergency stop button, a key-
selector to select the control panel and to start the machine.
1.6 Drive power
The machines can be powered by:
An electric-hydraulic system composed of rechargeable accumulators and electrical pump (models “RTE”).
Diesel Engine (models "RTD").
In any case both the hydraulic and the electric systems are equipped with all necessary protections (see electric and hydraulic
circuit diagrams annexed to this manual).
1.7 Machine life, demolition and decommissioning
The machine has been designed to last for 10 years in normal operating environments, if properly used and serviced. Within this
period, the manufacturer must carry out a complete inspection/overhaul.
If disposal of the unit is necessary, comply with current local regulations.
In Italy, the demolition/decommissioning must be notified to the local ASL / USL or ARPA.
The machine consists mainly of metal parts which are easy to be identified (steel for the most parts, and aluminium for the
hydraulic blocks); thus, we can state that the machine can be recycled at 90%.
European standards and those transposed by t
he member countries relating to respect for the environment
and the disposal of wastes envisage heavy administrative and penal fines in case of infringement.
In case of demolition/decommissioning, carefully keep to the provisions of applicable regulations,
especially as regards materials such as hydraulic oil and batteries.
To Next Page
Loading...