EasyManua.ls Logo

Airspan ProST - Connecting to LAN Network

Airspan ProST
71 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ProST Hardware Installation User Guide
Page 47 Commercial in Confidence UWB-D00111 Rev L
Figure35‐ProST&SDA4S
6.2 Connecting to LAN Network
The ProST typically interfaces with the subscriber's LAN network using the indoor SDA-1 Type II
adapter. This adapter provides one 100BaseT interface. However, optional IDU adapters (SDA-
4S Type II, SDA-4S/VL Type II or SDA-4S/DC Type II) are offered that provide four LAN ports for
interfacing with the subscriber's LAN network.
Caution: Only subscriber terminal equipment (e.g. computer modem port)
that is designed for full compliance with TNV-1 telecommunication network
connectivity can be connected to the SDA-1. Warranty of Airspan's
equipment shall be made void if the SDA-1 is connected to a computer that is
not compliant with TNV-1.

Table of Contents

Other manuals for Airspan ProST