14 - EDITING
Page 110 Version 2.00 - March, 1996
INSERT FROM CLIPBOARD
This will insert an edit at the current NOW time and will cause any audio after the insert
point to be shifted.
BEFORE INSERT
AFTER INSERT
NOW
Pressing INSERT will show this screen display:
The default selection is to insert material from clipboard 0 but you may, of course, insert
material from any of the clipboards 1-9 by selecting the appropriate number on the
numeric keypad. The length of the insert will be shown in the INSERT LENGTH field. Press
EXECUTE to complete the insert.
Prior to inserting the item from the clipboard, if you at all unsure what it is you are
inserting, use PLAY to audition it.
You can use the key to select whether the whole track will slip to accommodate
the insert (SLIP WHOLE TRACK) or just the remainder of the cue at the point of insert
(ONLY SLIP CUE) will slip. The result would be:
BEFORE INSERT
AFTER INSERT
NOW
AFTER INSERT - SLIP ONLY CUE
NOTE: The selection made here is retained when you leave the page. When you
subsequently re-enter the INSERT page, the same selection as you made previously will
be shown.
INSERTING TO OUT AND SYNC REFERENCES
As with PASTE and OVERLAY, you may also insert material referenced to the source
material’s OUT point by pressing INSERT, OUT, EXECUTE. The REFERENCED TO field in
the LCD will show OUT and the effect would be as follows:
BEFORE INSERT
AFTER INSERT + OUT
NOW
In this example, the inserted material all audio
before
the NOW time would slip allowing
you to back-time the insert.
To Next Page
Loading...
