EDITING - 14
Version 2.00 - March, 1996 Page 91
SELECT CUE
SELECT CUE marks the IN and an OUT at the start and end of a cue. This saves you
having to specifically mark the IN and OUT before you can proceed.
Typical operation is to line up the cue you are interested in on the NOW time, select the
track for EDIT and press SELECT CUE. The cue will be highlighted green and the SYNC
mark will be placed at the point at which it is selected. I.e.:
PLAY
PLAY
EDIT
PLAY
PLAY
NOW
BLUE (PLAY) GREEN (SELECTED)
IN OUT
PLAY
PLAY
PLAY
SYNC
EXAMPLE A - SELECTING A SINGLE CUE
This also works for stereo cues. Line the cues you are interested in on the NOW time,
select both relevant tracks for EDIT and press SELECT CUE. The IN and OUT will be
placed at the start and end of the cues on both tracks and the SYNC marker placed at the
point of selection. I.e.:
PLAY
PLAY
EDIT
PLAY
PLAY
NOW
BLUE (PLAY) GREEN (SELECTED)
IN OUT
PLAY
PLAY
SYNC
EDIT
EXAMPLE B - SELECTING A STEREO CUE ACROSS TWO TRACKS
You may also select multiple cues in this way. In this case, the IN and OUT will be placed
at the start and end of the longest cue(s) and anything that falls within that edit region will
be selected. For example, imagine that you have this situation:
PLAY
PLAY
EDIT
PLAY
PLAY
NOW
EDIT
EDIT
EDIT
BEFORE USING SELECT CUE
To Next Page
Loading...
