6 - DL1500 PANEL LAYOUT
Page 32 Version 2.00 - March, 1996
Above the ergonomically designed JOG wheel are the main dedicated edit keys such as
CUT, COPY, PASTE, INSERT, etc., for quick and convenient editing.
Also included in the EDIT section are EXIT, UNDO and EXECUTE keys.
Located directly beneath the LCD is a row of six soft keys, the function of which depends
on the DD1500’s current status.
The JOG wheel emulates reel rocking for finding edit points. It is possible to jog all tracks
simultaneously.
The DATA ENTRY section includes a numeric keypad for inputting timecode and values
and for selecting locator memories and edit clipboards. The +/- DATA ENTRY keys allows
you to set parameter values whilst the CURSOR keys are used for selecting parameter
fields in the DL1500’s LCD. The +/- DATA ENTRY keys can also be used to nudge audio
into sync and to go to the next and previous cues and the CURSOR keys double as
vertical and horizontal zoom keys.
The DL1500 also has a long throw professional fader and pan pot for setting the levels of
audio cues and of tracks for basic mixing. The fader may also be used to set input
recording levels.
Finally, the LINE OUT and HEADPHONES controls allow you to set monitoring levels for
the stereo analogue outputs and the headphone output on the rear of the DL1500.
These may be adjusted independently. The OUT A and OUT B switches allow you to
monitor output A, B or both.
To Next Page
Loading...
