19 - UTILITIES - MIXER
Page 188 Version 2.00 - March, 1996
METERS SETUP
In both pages, you may also set certain parameters relating to signal metering on the
DL1500 and the external monitor screen. Pressing METERS (F3) will display this screen:
The parameters are:
PANEL METERS Here you may select what is displayed on the DL1500’s
front panel meters. You may select OUT A/OUT B,
TRACKS 1-4, TRACKS 5-8, TRACKS 9-12 and TRACKS
12-16. The default is OUT A/OUT B.
VGA METERS Here you may select what will be displayed on the meters
on the VGA monitor. You may select INPUT LEVELS (to
view the inputs to the tracks selected for record), MIXER
LEVELS (to view the output of the tracks
after
the
DD1500m’s internal mixer) and TRACK LEVELS (to show
the true pre-fade level of the tracks
before
the DD1500m’s
internal mixer).
VDU METERS PEAK Here you can set the response speed of the external
monitor’s meters when reading peak levels. HOLD will keep
the peak level permanently displayed until a higher peak
level is received. SLOW, MEDIUM, FAST offer different
peak level response speed. You may also turn peak level
detection OFF if you wish.
Press EXIT to return to the mixer page you entered this page from.
To Next Page
Loading...
