21 - UTILITIES - DIRECTORY
Page 218 Version 2.00 - March, 1996
MOVING CLIPS TO OTHER LIBRARIES
When you copy a clip across to another library using COPY, the original clip is still in the
‘source’ library. You may wish to move a clip from one library to another, removing it from
the source library and placing it in the destination library. This is done using MOVE.
To move a clip, select the clip you want to move and press UTILS (F5):
Press MOVE (F6). You will receive this screen display:
You will be taken back to the main DIRECTORY list and you should select the library you
wish to move the clip to and press the flashing EXECUTE key. This will move the clip to
that library. You will be returned to the original library you moved the clip from and you will
receive this screen:
This indicates that the clip has been successfully moved to the other library. As with copy,
you can repeat the process and the ‘source’ and the ‘destination’ libraries remain selected
so that you can move clips between the two very quickly.
To Next Page
Loading...
Need help?
General
