14 - EDITING
Page 142 Version 2.00 - March, 1996
ORIGINAL FUNCTION
The ORIGINAL function appears on the main edit screen (F5).
This allows you to move the selected cue/edit region to the time where it was originally
recorded. For example, if you have slipped a piece of dialogue to a new position but wish
to place it back to the point at which it was originally recorded, press ORIGNL. Pressing
ORIGNL will display this screen:
Pressing EXECUTE will move the cue/region to its original record time.
NOTE 1: If the recording was not made to external timecode, it will be moved to
00:00:00:00.0.
NOTE 2: You can also see a cue’s original timecode position by going to EDIT CUE.
To Next Page
Loading...
