13 - AUTOLOCATOR
Page 80 Version 2.00 - March, 1996
CLEARING LOCATE MEMORIES
Sometimes, it may be necessary to clear (delete) one or more (or all) locator memories.
There is no real benefit to this other than reducing clutter in the scroll bar by removing
locate memories that are no longer required.
CLEARING SINGLE LOCATE MEMORIES
To clear a single locate memory, press SHIFT+GOTO(STORE), select the locator memory
you wish to clear and press F3/F4 - CLEAR. If you make a mistake, simply press STORE
again to re-mark it.
CLEARING ALL LOCATE MEMORIES
To clear
all
locate memories, press SHIFT+GOTO(STORE) and then SHIFT+F3/F4. You
will receive this screen.
Press LOCATOR to clear all locate memories; press GRABS to clear all GRAB markers.
You will receive prompts for these and the EXECUTE key’s LED will flash. You should
press EXECUTE to clear or EXIT to abort.
To Next Page
Loading...
