22 - SYSTEM - DISK
Page 246 Version 2.00 - March, 1996
RESTORING A BACKUP
To restore data, in the SYSTEM DISK page press BACKUP. You will see this screen:
Select SCSI TAPE. You will see this screen:
Press RESTORE (F5/6). You will see this screen:
As you can see, this is basically the reverse of the SCSI BACKUP page. The fields are:
TITLE Selects/shows the name of the backup you wish to restore.
TO DISK Selects the disk the data will be restored to.
FROM SCSI TAPE Selects the tape drive the data will be restored from.
RESTORE TYPE Selects what will be restored to the disk.
To Next Page
Loading...
