22 - SYSTEM - I/O
Page 224 Version 2.00 - March, 1996
EXT TIMECODE OK - The DD1500 will send out a TTL
pulse when external timecode is being successfully
received.
EXT WORDCLOCK OK - The DD1500 will send out a TTL
signal when external wordclock is being successfully
received.
Applications for the GPOs are varied and one that immediately springs to mind is that of
using one of the GPO outputs set to RECORDING to turn on a red light every time you
drop into record.
Press EXIT to leave this page. You will be returned to the main SYSTEM SETUP page.
You can go back to the GPI page by pressing F1 again.
To Next Page
Loading...
