Akai DD1500

22 - SYSTEM - DISK
Page 240 Version 2.00 - March, 1996
The fields on the SCSI BACKUP page are:
TITLE You may give the backup a title of up to ten characters. This will be
stored in the SCSI tape’s directory and you will be able to use this
name to selectively restore the backup in future in the event of you
archiving several different backups to tape. Naming is done in the
usual manner either by pressing NAME and entering a ten
character name using the track select keys or by typing on the
external PC keyboard if connected. If you do not specifically give it
a name, the default name BACKUP will be used.
FROM DISK This selects the disk that will be backed up to the SCSI tape drive.
TO SCSI TAPE This selects the SCSI ID of the tape drive.
NOTE: As with any SCSI device, the tape’s SCSI ID should be unique and should not
share the same ID as another device on the SCSI buss.
BACKUP TYPE This selects what will be backed up to the SCSI tape. You may
select:
SELECTED FILES You may, via F3/F4, select specific files to
backup. These may be projects or libraries.
ALL PROJECTS You may backup all the projects on the
selected disk.
ALL LIBRARIES You may backup all the libraries on the
selected disk.
ALL PROJS & LIBS You may backup all the projects and all the
libraries on the selected disk.
ENTIRE DISK You may backup everything on the disk.