56 Version 1.21
MULTI
s5000
/
s6000
EXPAND MULTI
This allows you to change the number of parts in a multi. Pressing this
will pop-up a prompt and you have the option to expand the currently
selected multi to 64- or 128-parts (or to cancel). If the multi already has
64- or 128- parts, you will be prompted accordingly.
This is useful in the event of you accidentally creating a 32-part multi
when in fact you wanted a 64- or 128-part multi or in cases where you
reach the limit of the current multi and need to add more parts.
RENUMBER MULTI This takes you to a new page where you may change the MIDI program
number of the multis in memory. Pressing RENUMBER will show
something like this screen:
MIDI program numbers are used in order to select multis remotely via
MIDI. For example, in a live situation, you may wish to use MIDI program
change to select multis remotely from your keyboard or sequencer. Multis
may be given a number 1-128 or OFF.
To renumber a multi, simply move the cursor to the multi you want to
renumber and use the DATA wheel to set the appropriate number (or
switch it to OFF).
for example, “GIG FOLDER”). When you come to load that folder prior
to your gig, they will load in the correct order 1-XXX.
Pressing RENUMBER 1-XXX (F13) will renumber all the multis in memory
sequentially 1-128 (or whatever the upper limit is of the number of multis
in memory). The multis will be renumbered in the order in which they
appear in the list. For example:
If there are more than 128 multis in memory, any above 128 will be
renumbered to 128. When you press RENUMBER 1-XXX, you will receive
a prompt asking you to confirm that you wish to proceed. Respond
accordingly.
To Next Page
Loading...
Need help?
General
