Akuvox E16 Series User Manual

161
Parameter set-up:

Custom Option: enter the DHCP code that matched with
corresponding URL so that device will find the configuration file
server for the configuration or upgrading.

DHCP Option 66: If none of the above is set, the device will
automatically use DHCP Option 66 for getting the upgrade server
URL. This is done within the software and the user does not need to
specify this. To make it work, you need to configure the DHCP
server for the option 66 with the update server URL in it.

DHCP Option 43: If the device does not get an URL from DHCP
Option 66, it will automatically use DHCP Option 43. This is done
within the software and the user does not need to specify this. To
make it work, you need to configure the DHCP server for the option
43 with the update server URL in it.

Akuvox E16 Series Specifications

General

Brand	Akuvox
Model	E16 Series
Category	Intercom System
Language	English