Akuvox E16 Series User Manual

AKUVOX SMART INTERCOM www.akuvox.com
10

With Embedded Gang box in the Wall
Steps
Installation
Picture
Installation Description
1
According to the position of the
cable, put the wall-mounting
bracket closely on to the wall and
mark the four positioning holes,
while making sure that relative
positions between wall-mounting
bracket and wire hole are correct.
Note: The positioning holes should
be market in the center of the holes.
2
Take off the wall-mounting and
drill the four marked positioning
holes and the wire holes using 5mm
hand drills.
3
Insert four plastic wall anchors into
the holes.

Akuvox E16 Series Specifications

General

Brand	Akuvox
Model	E16 Series
Category	Intercom System
Language	English