Akuvox E16 Series User Manual

72
digit DTMF code or 2-digit DTMF code etc., according to your
need.

1-digt DTMF : set the 1-digt DTMF code within range from ( 0-9
and *,#).

2~4 Digits DTMF: set the DTMF code according to the DMTP
Option setting. For example, you are required to set the 3-digits
DTMF code if DTMP Mode is set as 3-digits.

Relay Status: relay status is low by default which means normally
closed(NC) If the relay status is high, then it is in Normally Open
status(NO).

Relay Name: name the relay switch according to your need. For
example you can name the relay switch according to where the
relay switch is located for the convenience.
Note:
 Only the external devices connected to the relay switch needs

Akuvox E16 Series Specifications

General

Brand	Akuvox
Model	E16 Series
Category	Intercom System
Language	English