Type: select among three options “Disabled” “WebRelay” and
“Both”. Select “WebRelay” to enable the web relay. Select
“Disable” to disable the web relay. Select “Both” to enable both
local relay and web relay.
IP Address: enter the we relay IP address provided by the web
relay manufacturer.
User Name: enter the User name provided by the web relay
manufacturer.
Password: enter the password provided by the web relay
manufacturer.The passwords is authenticated via HTTP and you
can define the passwords using “http get” in Action.
Web Relay Action: enter the specific web relay action command
provided by the web manufacturer for different actions by the web
relay.
Web Relay Key: enter the configured DTMF code, when the door is
unlock via DTMF code, the action command will be sent to the web