— 31 —— 30 —
SYSTEM MENU
Email Alert
w
Tap Enable to enable or Disable
to disable Email alerts.
Tap the SSL box to make sure it
is checked.
x
Tap on the SMTP Server field.
A Gmail notice displays with
the port information; tap OK
or wait a few seconds and the
keyboard will appear. Enter smtp.
gmail.com as the SMTP server.
You can switch the keyboard
from alphabetical characters to
numbers/symbols and back again
by tapping the field to the left of
the space bar. Tap Enter. The
Email Alert screen displays again.
Repeat the previous step for the
following settings:
USERNAME: Enter your Gmail
username.
PASSWORD: Enter your Gmail
password.
EMAIL TO: Enter the email
address you want the alerts to go
to. (This can be different than the
SMTP outgoing email account.)
SMTP Port: Enter 465.
y
Tap OK, and if entered correctly,
you will see the success screen.
You will now receive email alerts
when motion is detected. Make
sure to disable (see step 3) when
you do not want to receive emails.
SYSTEM MENU
Schedule Record
u
Follow steps 1 through 3 on page
24 to access the System Setup.
Tap Recorder Setup to access
the Recorder Setup screen.
v
Tap Schedule Record.
w
Tap a program (you can set up to
five programs).
x
Tap the camera number you want
to record (1 - 4). You can select
up to all four cameras to record.
You can schedule up to five recording sessions. The total recording time available is limited to
the size of your SD card. A higher capacity SD card will provide more recording time. These
recording sessions must begin and end within a single 24-hour period; they cannot cross into
the next day.
TIP: Set the time as shown on page
41, otherwise the alarm setting will not
be accurate.
To Next Page
Loading...
Need help?
General