— 41 —— 40 —
SYSTEM MENU SYSTEM MENU
System Setup – Setting the TimeSystem Setup – Screen Auto Lock
u
Follow steps 1 through 3 on page
24 to access the System Setup.
Tap System Setup to access the
System Setup screen.
v
Tap Time.
w
Tap Time Setting.
x
Tap of the desired setting (Month,
Day, Hour, etc.) and set using the
Up and Down arrows.
If in Daylight Savings Time, tap the
Daylight Savings Time check-box.
After setting the time, tap SAVE.
u
Follow steps 1 through 3 on page
24 to access the System Setup.
Tap System Setup to access the
System Setup screen.
v
Tap Screen Auto Lock.
w
Tap Disable to disable this
feature or Enable to enable this
feature.
x
Tap to return to the previous
screen or to return to the Live
Quad view.
Set the time as follows:When you turn on Auto Lock mode, the monitor will automatically enter Screen Lock mode
after it has been idle for two minutes. Auto Lock disables the touch screen and removes the
icons from the display.
When the auto-lock feature has been enabled and your Live screen is locked, just tap the
Power button once to unlock the screen and return to normal touch screen operation. At any
time from the Live screen, you can manually lock the system by tapping the Power button,
whether or not the auto-lock feature has been enabled.
Daylight Saving
Time Zone