EasyManuals Logo

Alcatel-Lucent 7210 SAS M Basic System Configuration Guide

Alcatel-Lucent 7210 SAS M
340 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #282 background imageLoading...
Page #282 background image
System Administration Commands
Page 282 7210 SAS M, X Basic System Configuration Guide
Syntax reboot [upgrade] [auto-init] [now]
Context admin
Description This command reboots the s or upgrades the boot ROMs.
If no options are specified, the user is prompted to confirm the reboot operation. For example:
ALA-1>admin# reboot
Are you sure you want to reboot (y/n)?
If the now option is specified, boot confirmation messages appear.
Parameters upgrade — Enables card firmware to be upgraded during chassis reboot. The 7210 SAS OS and the
boot.tim support functionality to perform automatic firmware upgrades on bootrom. The
automatic upgrade must be enabled in the 7210 SAS OS Command Line Interface (CLI) when
rebooting the system.
When the upgrade keyword is specified, a chassis flag is set for the BOOT Loader (boot.tim)
and on the subsequent boot of the 7210 SAS OS on the chassis, any firmware images on s
requiring upgrading will be upgraded automatically.
If an 7210 SAS is rebooted with the admin reboot command (without the upgrade keyword),
the firmware images are left intact.
During any firmware upgrade, automatic or manual, it is imperative that during the upgrade
procedure:
• Power must NOT be switched off or interrupted.
• The system must NOT be reset.
• No cards are inserted or removed.
Any of the above conditions may render cards inoperable requiring a return of the card for
resolution.
now — Forces a reboot of the router immediately without an interactive confirmation.
auto-init — Specifies to reset the BOF and initiates an auto-init boot with DHCP option reboot.
save
Syntax save [file-url] [detail] [index]
Context admin
Description This command saves the running configuration to a configuration file. For example:
A:ALA-1>admin# save ftp://test:test@192.168.x.xx/./100.cfg
Saving configuration .........Completed.
By default, the running configuration is saved to the primary configuration file.
Parameters file-url — The file URL location to save the configuration file.
Default The primary configuration file location.

Table of Contents

Other manuals for Alcatel-Lucent 7210 SAS M

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Alcatel-Lucent 7210 SAS M and is the answer not in the manual?

Alcatel-Lucent 7210 SAS M Specifications

General IconGeneral
BrandAlcatel-Lucent
Model7210 SAS M
CategorySwitch
LanguageEnglish

Related product manuals