Alcatel-Lucent 7210 SAS M Basic System Configuration Guide

System Management
7210 SAS M, X Basic System Configuration Guide Page 283
Values file url: local-url | remote-url: 255 chars max
local-url: [cflash-id/][file-path], 200 chars max, including the cflash-id
directory length, 99 chars max each
remote-url: [{ftp://} login:pswd@remote-locn/][file-path]
remote-locn [ hostname | ipv4-address]
ipv4-address a.b.c.d
255 chars max, directory length 99 chars max each
cflash-id: cf1:
detail — Saves both default and non-default configuration parameters.
index — Forces a save of the persistent index file regardless of the persistent status in the BOF file.
The index option can also be used to avoid an additional boot required while changing your
system to use the persistence indices.
enable-tech
Syntax [no] enable-tech
Context admin
Description This command enables the shell and kernel commands.
NOTE: This command should only be used with authorized direction from the Alcatel-Lucent
Technical Assistance Center (TAC).
tech-support
Syntax tech-support file-url
Context admin
Description This command creates a system core dump.
NOTE: This command should only be used with authorized direction from the Alcatel-Lucent
Technical Assistance Center (TAC).
file-url — The file URL location to save the binary file.
file url: local-url | remote-url: 255 chars max
local-url: [cflash-id/][file-path], 200 chars max, including the cflash-id
directory length, 99 chars max each
remote-url: [{ftp://} login:pswd@remote-locn/][file-path]
remote-locn [ hostname | ipv4-address]
ipv4-address a.b.c.d
255 chars max, directory length 99 chars max each
cflash-id: cf1:
update-golden-bootstrap

Alcatel-Lucent 7210 SAS M Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS M
Category	Switch
Language	English