Alcatel-Lucent 7210 SAS M - Page 321

System Management
7210 SAS M, X Basic System Configuration Guide Page 321
===============================================================================
System Status CPM A : Master Locked
Reference Input Mode : Non-revertive
Quality Level Selection : Enabled
System Quality Level : prc
Reference Order : ref1 ref2
Reference Input 1
Admin Status : up
Rx Quality Level : prc
Quality Level Override : none
Qualified For Use : Yes
Selected For Use : Yes
Source Port : 1/1/17
Reference Input 2
Admin Status : down
Rx Quality Level : unknown
Quality Level Override : none
Qualified For Use : No
Not Qualified Due To : disabled
Selected For Use : No
Not Selected Due To : not qualified
Source Port : None
===============================================================================
*A:7210-SAS>show>system#
chassis
Syntax chassis [environment] [power-supply]
Context show
Description This command displays general chassis status information.
Parameters environment — Displays chassis environmental status information.
Default Display all chassis information.
power-supply — Displays chassis power supply status information.
Default Display all chassis information.
Output Chassis Output — The following table describes chassis output fields.
Label Description
Name
The system name for the router.
Type
The router series model number.
Location
The system location for the device.