Root Commands
7210 SAS M, X Basic System Configuration Guide Page 51
The output of this command is similar to the output of a show config command. This command, how-
ever, lists the configuration of the context where it is entered and all branches below that context
level.
By default, the command only enters the configuration parameters that vary from the default values.
The detail keyword causes all configuration parameters to be displayed.
For example,
Parameters detail — Displays all configuration parameters including parameters at their default values.
logout
Syntax logout
Context <GLOBAL>
Description This command logs out of the router session.
When the logout command is issued from the console, the login prompt is displayed, and any log IDs
directed to the console are discarded. When the console session resumes (regardless of the user), the
log output to the console resumes.
When a Telnet session is terminated from a logout command, all log IDs directed to the session are
removed. When a user logs back in, the log IDs must be re-created.