Global Commands
Page 52 7210 SAS M, X Basic System Configuration Guide
password
Syntax password
Context <ROOT>
Description This command changes a user CLI login password.
When a user logs in after the administrator forces a new-password-at-login, or the password has
expired (aging), then this command is automatically invoked.
When invoked, the user is prompted to enter the old password, the new password, and then the new
password again to verify the correct input.
If a user fails to create a new password after the administrator forces a new-password-at-login or
after the password has expired, the user is not allowed access to the CLI.
ping
Syntax ping {ip-address | dns-name} [rapid | detail] [ttl time-to-live] [tos type-of-service] [size
bytes] [pattern pattern] [source ip-address] [interval seconds] [{next-hop ip-address} |
{interface interface-name} | bypass-routing] [count requests] [do-not-fragment] [router
[router-instance] [timeout timeout]
Context <GLOBAL>
Description This command is the TCP/IP utility to verify IP reachability.
Parameters ip-address | dns-name — The remote host to ping. The IP address or the DNS name (if DNS name
resolution is configured) can be specified.
rapid | detail — The rapid parameter specifies to send ping requests rapidly. The results are reported
in a single message, not in individual messages for each ping request. By default, five ping
requests are sent before the results are reported. To change the number of requests, include the
count option.
The detail parameter includes in the output the interface on which the ping reply was received.
Example output:
*A:ALU-7210# ping 192.xxx.xxx.xxx
PING 192.xxx.xxx.xxx 56 data bytes
64 bytes from 192.xxx.xxx.xxx: icmp_seq=1 ttl=64 time<10ms.
64 bytes from 1192.xxx.xxx.xxx: icmp_seq=2 ttl=64 time<10ms.
64 bytes from 192.xxx.xxx.xxx: icmp_seq=3 ttl=64 time<10ms.
64 bytes from 192.xxx.xxx.xxx: icmp_seq=4 ttl=64 time<10ms.
64 bytes from 192.xxx.xxx.xxx: icmp_seq=5 ttl=64 time<10ms.
---- 192.xxx.xxx.xxx PING Statistics ----
5 packets transmitted, 5 packets received, 0.00% packet loss
round-trip min < 10ms, avg < 10ms, max < 10ms, stddev < 10ms
*A:ALU-7210#
To Next Page
Loading...
Need help?
General
