Security Command Reference
Page 110 7705 SAR OS System Management Guide
User Management Commands
user
Syntax [no] user user-name
Context config>system>security
Description This command creates a local user and a context to edit the user configuration.
If a new user-name is entered, the user is created. When an existing user-name is specified, the user
parameters can be edited.
When a new user is created and the info command is entered, the system displays a password with
has2 encryption in the output screen. However, when using that user name, there will be no password
required. The user can log in to the system by entering their user name and then pressing ↵ at the
password prompt.
Unless an administrator explicitly changes the password, it will be null. The hashed value displayed
uses the user name and null password field, so when the user name is changed, the displayed hashed
value will change.
The no form of the command deletes the user and all configuration data. Users cannot delete
themselves.
Default none
Parameters user-name — the name of the user, up to 16 characters
user-template
Syntax user-template tacplus_default
Context config>system>security
Description This command configures default security user template parameters.
Parameters tacplus_default — specifies that the default template is used for the configuration
To Next Page
Loading...
