Alcatel-Lucent 7705 SAR-8 - Configuring TACACS+ Authorization; Configuring TACACS+ Accounting

Security
7705 SAR OS System Management Guide Page 67
Configuring TACACS+ Authorization
In order for TACACS+ authorization to function, TACACS+ authentication must be enabled
first. See Enabling TACACS+ Authentication on page 66.
On the local router, use the following CLI commands to configure TACACS+ authorization:
CLI Syntax: config>system>security
tacplus
authorization
no shutdown
The following example displays the CLI syntax usage:
Example: config>system>security>
config>system>security# tacplus
config>system>security>tacplus# authorization
config>system>security>tacplus# no shutdown
The following example displays the TACACS+ authorization configuration:
ALU-1>config>system>security>tacplus# info
----------------------------------------------
authorization
timeout 5
single-connection
server 1 address 10.10.0.5 secret "h6.TeL7YPohbmhlvz0gob." hash2
server 2 address 10.10.0.6 secret "h6.TeL7YPog7WbLsR3QRd." hash2
server 3 address 10.10.0.7 secret "h6.TeL7YPojGJqbYt85LVk" hash2
server 4 address 10.10.0.8 secret "h6.TeL7YPoiCfWKUFHARvk" hash2
server 5 address 10.10.0.9 secret "h6.TeL7YPojuCyTFvTNGBU" hash2
----------------------------------------------
ALU-1>config>system>security>tacplus#
Configuring TACACS+ Accounting
On the local router, use the following CLI commands to configure TACACS+ accounting:
CLI Syntax: config>system>security
tacplus
accounting
The following example displays the CLI syntax usage:
Example: config>system>security>
config>system>security# tacplus
config>system>security>tacplus# accounting