Configuring SNMP Components
Page 164 7705 SAR OS System Management Guide
Configuring SNMP Components
Use the CLI syntax displayed below to configure the following SNMP scenarios:
• Configuring a Community String
• Configuring View Options
• Configuring Access Options
• Configuring USM Community Options
• Configuring Other SNMP Parameters
CLI Syntax: config>system>security>snmp
attempts [count] [time minutes1] [lockout minutes2]
community community-string [hash | hash2] access-
permissions [version SNMP version]
usm-community community-string [hash | hash2] group
group-name
view view-name subtree oid-value
mask mask-value [type {included | excluded}]
access group group-name security-model security-model
security-level security-level [context context-
name [prefix-match]] [read view-name-1] [write
view-name-2] [notify view-name-3]
Configuring a Community String
SNMPv1 and SNMPv2c community strings are used to define the relationship between an
SNMP manager and agent. The community string acts like a password to permit access to
the agent. The access granted with a community string is restricted to the scope of the
configured group.
One or more of the following characteristics associated with the string can be specified:
• read-only, read-write, and read-write-all permission for the MIB objects accessible
to the community
• the SNMP version, SNMPv1 or SNMPv2c
Default access features are preconfigured by the agent for SNMPv1 and SNMPv2c.
Use the following CLI syntax to configure community options:
CLI Syntax: config>system>security>snmp
community community-string [hash | hash2] access-
permissions [version SNMP version]
To Next Page
Loading...
